A minimum of 2 coats of sealer is recommended. Elevated temperatures, heavy coats and humidity may extend dry time. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes.
Apply sealer in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Floor surface must be clean, dry and free of residue before finish is applied. RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. This product is of specific benefit in preparing old, worn or porous tile floors for finishing. Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
